Skip to main content

Vibratissimo

Vibratissimo is a line of App-controlled Bluetooth Vibrators.

Device Identification​

All Vibratissimo devices share the same default BLE name ("Vibratissimo"), as well as same service and characteristic UUIDs.

Bluetooth Details​

Service UUID

00001523-1212-efde-1523-785feabcd123

Mode Setting Control (Write) Characteristic UUID

00001524-1212-efde-1523-785feabcd123

Motor Speed Control (Write) Characteristic UUID

00001526-1212-efde-1523-785feabcd123

Device Temperature (Read) Characteristic UUID

00001527-1212-efde-1523-785feabcd123

Protocol​

The control protocol for the Vibratissimo allows the user to:

  • Set a pattern/mode
  • Control motor speed (when using motor control pattern)
  • Retreive the temperature of the device

Mode Selection​

Mode selection is send via writes to the mode selection characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte:

  • 0x01: Turn device on
  • 0x02: Play pattern that ramps up and down
  • 0x03: Put device into "motor control" mode

Sending anything higher than 0x03 will cause the device to stop working until the host disconnects and reconnects

Motor Control​

If the device is put into "motor control" mode, it can be controlled via writes to the Motor Speed Control characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte is 0x00-0xff, with 0x00 turning motor off, and 0xff setting motor full on.

Temperature​

Temperature is retreived via a read from the Temperature characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte is temperature, with lower being higher.